两个字符串连接函数
答:思路:两个字符串的拼接可以使用strcat函数。strcat函数原型: char *strcat(char *s1,char *s2);需要引入头文件:#include <string.h> 功能:把s2所指字符串添加到s1结尾处并添加'\0'。注意:s1必须有足够的空间来容纳s1和s2的字符串。参考代码:include "stdio.h" #include "string.h" int ...
答:1、实际上就是实现strcat这个字符串库函数,在vc自带的crt源码或者linux平台的glibc库中都有strcat的源码,自己可以查阅参考,看看库开发者是如何写代码的,对于学习C语言非常有用。2、示例 include <stdio.h> char *strcat(char *str1, char *str2){ if((str1==NULL)||(str2==NULL)) throw "...
答:// void fun(char p1[], char p2[]) 的最后一行p2[j]='\0';// 改为:p1[n]='\0';include <stdio.h>void fun(char p1[], char p2[]){int i=0,j=0,n=0;while(p1[i]!=0){i++;n++;}while(p2[j]!=0){p1[n]=p2[j];n++;j++;}p1[n]='\0';}main(){char s1...
答:void sappend(char *a,char *b){ while(*a)a++;while(*a++=*b++);}main(){ char t[80],s[80];puts("输入第一个字符串:");gets(s);puts("输入第二个字符串:");gets(t);sappend(s,t);puts("结果是:");puts(s);}其实写这个没什么意思,因为C已经有标准的库函数了,在...
答:1、新建一个工程和.c文件,输入头文件和主函数。2、定义变量类型。3、调用cpy函数。4、定义一个函数,并定义变量类型。5、用一个For 语句和if语句判断是否为元音。6、最后加一个字符串结束符,并在主函数中输出。7、编译。运行。
答:include <stdio.h>char * my_strcat(char *dst, char *src){ char *p=dst, *q=src; while(*p)p++; while(*q)*p++=*q++; *p=0; return dst;}int main(){ char s[100],d[100]; scanf("%s%s",d,s); my_strcat(d,s); puts(d); return 0...
答:include<stdio.h> void main(){ void con(char sting1[],char sting2[],char sting3[]);char s1[20],s2[20],s3[40];printf("Input sting1: ");scanf("%s",s1);printf("Input sting2: ");scanf("%s",s2);con(s1,s2,s3);printf("%s\n",s3);} void con(char sting1[],...
答:include<stdio.h>catstr(char *str1,char *str2);main(){char s1[20]="abc",s2[]="ABC";//s1要足够大char *p1=s1,*p2=s2;catstr(p1,p2);puts(s1);//在这里输出}catstr(char *str1,char *str2){while (*str1!='\0'){ str1++;} while (*str2!='\0'){ *str...
答:(1)用strcat函数 include <stdio.h> include <string.h> int main (){ char src[50], dest[50];strcpy(src, "This is source");strcpy(dest, "This is destination");strcat(dest, src);printf("最终的目标字符串: |%s|", dest);return(0);} (2)不用strcat函数 include <stdio...
答:j=0;for(;*(a+i);i++)*(c+i)=*(a+i);for(;*(b+j);i++,j++)*(c+i)=*(b+j);*(c+i)=*(b+j);return 0;}int lenstr(char *a){int i=0;for(;*(a+i);i++);return i;}void main(){ char str1[]="Every one is ",str2[]="leaning C.",str12[...
网友评论:
沙嵇17335689976:
写一函数,将两个字符串连接 -
64400鲁菲
: void mystrcat(char *s1,char *s2) { while(*s1++); s1--; while(*s1++ = *s2++); }
沙嵇17335689976:
在C语言编程中,如何利用调用函数来把两个字符串连接起来? -
64400鲁菲
: strcat(a,b)把字符串b连到字符串a后面 举例; strcat("wo","niu");//输出woniu
沙嵇17335689976:
用C语言写出一函数,将两个字符串连接,该怎么写 -
64400鲁菲
: void concat(char *s1, int size1, char *s2, int size2, char *sout) {int i;for (i = 0; i < size1; ++i)sout[i] = s1[i];for (i = 0; i < size2; ++i)sout[i + size1] = s2[i];sout[i] = '\0'; } 示例使用方法: char *s1 = "ABCD"; char *s2 = "12345"; char sout[100];...
沙嵇17335689976:
用c语言编写一个将两个字符串连接起来函数两个字符串由主函数输入, 连接后的字符串也由主函数输出. -
64400鲁菲
: #include<stdio.h> void main() {void con(char sting1[],char sting2[],char sting3[]);char s1[20],s2[20],s3[40]; printf("Input sting1: ");scanf("%s",s1);printf("Input sting2: ");scanf("%s",s2);con(s1,s2,s3);printf("%s\n",s3); } void con(...
沙嵇17335689976:
用strcat函数把两个字符串连起来 -
64400鲁菲
: strcat(连接两字符串) 相关函数bcopy,memccpy,memcpy,strcpy,strncpy 表头文件#include <string.h> 定义函数char *strcat (char *dest,const char *src); 函数说明strcat()会将参数src字符串拷贝到参数dest所指的字符串尾.第一个参数dest...
沙嵇17335689976:
写一函数实现连接俩个字符串 -
64400鲁菲
: #include <stdio.h> char *mystr(char *s1, const char *s2) { int i = 0, j = 0; while(s1[i] != '\0') i++; while((s1[i++] = s2[j++]) != '\0'); return s1; } int main() { char s1[80], s2[80]; printf("请输入第一个字符串: "); gets(s1); fflush(stdin); printf("请输入第...
沙嵇17335689976:
编写函数将给定的两个字符串连接成一个字符串 -
64400鲁菲
: #include main(){ char str1[80],str2[80]; int i=0,j=0; puts("puts two string:"); gets(str1); gets(str2); while(str1[i]!='\0')i++; while(str2[j]!='\0')str1[i++]=str2[j++]; printf ("result is:%s\n",str1); }
沙嵇17335689976:
C语言编程:编写一个将两个字符串进行连接的函数. -
64400鲁菲
: #include void lianjie(char a[],char b[]); { strcat(a,b); printf("%s",a); } main() { char s[40],c[20]; printf("qing shuru 1 zifushuzu:\n"); gets(s); printf("qing shuru 2 zifushuzu:\n") gets(c); lianjie(s,c); }
沙嵇17335689976:
用C语言写一个函数,将两个字符串连接. -
64400鲁菲
: 1、实际上就是实现抄strcat这个字符串库函数,在vc自带的crt源码或者linux平台的glibc库中都有strcat的源码,自己可以查阅参考,看看库开发者是如何zd写代码的,对于学习C语言非常有用. 2、示例 #include <stdio.h>char *strcat(char *str1, ...
沙嵇17335689976:
编写程序“编写函数实现将两个字符串的连接”. -
64400鲁菲
: /*运行结制果为: 请输入string1: chinsung 请输入string2: lee string1, string2两字2113符串连5261接后4102的结果为:1653 chinsunglee. */ #include #include char concatenate(char string1[], char string2[]) { int i,j; i=strlen(string1); for(j=0;j