c语言求任一整数m的n次方
答:float f(int m,int n){ float count; //count用来记录每一步的结果,以至最终结果.if(n>1) count=f(m,n-1)*m; //一步一步的把m乘上去;每乘一步都n-1.直到n值为1时为止 if(n==1) count=m; //如果初始时n值为1,直接输出m值 return count;} ...
答:这是一个实例,函数cm就是表示x的n次方。代码如下:include float cm(float x,int n){ if(n==1)return x;else return x*cm(x,n-1);} void main(){ int n;float x;scanf("%d",&n);//n;scanf("%f",&x);//x;printf("x的%d次方是:%f",n,cm(x,n));} ...
答:最前面还得加个#include <math.h> 然后将 m=power(m,2);改成 n=pow(m,2);
答:1、C语言中计算一个数的N次方可以用库函数pow来实现,还可以直接使用2^3就可以算出结果。pow函数原型:double pow(double x,double y)。其中x值是底数,y值是幂。举例:double a=pow(3.14,2)计算3.14的平方。注意:使用pow函数时,需要将头文件#include<math.h>包含进源文件中。2、在C语言...
答:C语言中计算一个数的N次方可以用库函数pow来实现。函数原型:double pow(double x, double y)。举例如下:double a = pow(3.14, 2); // 计算3.14的平方。注:使用pow函数时,需要将头文件#include<math.h>包含进源文件中。
答:include <stdio.h> void main(){ int m,n,i=1,s=1;printf("请输入:\n");scanf("%d%d",&m,&n);while(i<=n){ s*=m;i++;} printf("%d\n",s);}
答:1.int newpow(int m,int n);//求m的n次方 这个是你的注释把;你真正的调用在printf把。2.printf("The reslut is :%d\nThe count is :%d",newpow(m,n),count);//为什么这里的count只会输出 printf规则,先count,在newpow(m,n),所以你没调用newpow,所以count=0;...
答:i++){result_data = result_data*radix;}return result_data;}int main(){double radix; int n;printf("底数是?->");scanf("%lf", &radix);//这里printf("指数是?->");scanf("%d", &n);printf("%f的%d次方是%fです。\n", radix, n, power(radix, n));return 0;} ...
答:区分x和n的类型,以及对结果的要求,可以有如下两种方式。1 使用pow函数。在C语言的标准头文件math.h中,有库函数pow,声明为 double pow(double x, double n);其功能为计算x的n次方并返回结果。所以可以用pow计算x的n次方。该函数适用于以下几种情况:a. 当n为浮点数类型时,必须使用pow。b. ...
答:引用math.h库,引用方法为在程序开始时 写入:#include<math.h> 例如:include<stdio.h> include<math.h> int main(){ int n=2,m;m=pow(2,3);printf("%d",m);return 0;}
网友评论:
郝赖18772588783:
用C语言编写一个求M的N 次幂的函数 -
30461郑咸
: #include <stdio.h> long power(int m,int n); int main() {int m=0;int n=0;long result=0;printf("Input the m,n:\n");scanf("%d,%d",&m,&n);result=power(m,n);printf("%d",result);getch(); }long power(int m,int n) {int i=0;long result=1;for(i...
郝赖18772588783:
C语言中M的N次方 -
30461郑咸
: 在C语言中, M的N次方,可以有如下几种表示方法: 1、使用标准库函数的pow.形式为 pow(M,N); 使用pow函数需要引用头文件math.h, pow的参数和返回值类型都是double的,所以得到的是近似值. 2、对于要得到精确值的,在C语言中并...
郝赖18772588783:
我有个关于C程序编程的试题,求M的N次方怎么写? -
30461郑咸
: pow(x,y)就是x 的y次方 如i=pow(2,10); 就是i=2的10次方, 头文件是#include
郝赖18772588783:
编写一个函数,计算一个整数m的n次幂,在主函数中输入m和n,并在主函数中输出计算结果 用C语言 -
30461郑咸
: 代码:#include<stdio.h> int main() { int m,n; int s=1; int power(int a,int b); scanf("%d %d",&m,&n); printf("%d",power(m,n)); } int power(int a,int b) { int t=1; if(b==1) t=a; else t=a*power(a,b-1); return(t); } 扩展资料:运行结果:递归方法代码:#...
郝赖18772588783:
求出m的n次方 c语言递归 -
30461郑咸
: return m*func(m,n-1); sum = func(m,n);
郝赖18772588783:
用C语言编写一个求M的N 次幂的函数 -
30461郑咸
: #include long power(int m,int n);int main(){ int m=0; int n=0; long result=0; printf("Input the m,n:\n"); scanf("%d,%d", r...
郝赖18772588783:
C语言、输入一个整数m,求m的n次方根,卜用数学函数`` -
30461郑咸
: // N>0,M>0 #include<stdio.h> #include<math.h> void main() { int m,n; double p,s; int i; printf("请输入整数m和n次方:"); scanf("%d%d",&m,&n); for(p=1.0;p<=sqrt(m);p+=0.000001) { s=1.0; for(i=0;i<n;i++) s*=p; if(m-s<1e-6) { printf("%lf\n",p); break; } } }
郝赖18772588783:
用C语言实现m的n次方运算,m和n是大数据,不能用C语言的数据类型,求代码结果 -
30461郑咸
: 1. 用一个C类型存储固定的位数N2. 做一个链表类,每个节点代表N位3. 重载+-*/运算,这里主要是乘法,然后就可以实现m的n次方了
郝赖18772588783:
C语言写m的n次方,不用pow函数,自己写了一个程序,但是答案部队……请前辈指点下 -
30461郑咸
: scanf("%f", &radix); 改成scanf("%lf", &radix); f是给float用的,而你用过的是double
郝赖18772588783:
求m的n次方?用c语言怎么求不出来?怎么求不出来 -
30461郑咸
: 整个的程序错了.#include<stdio.h> int main() { int m,n,y; scanf("%d%d",&m,&n); for(y=1;n;n--)y*=m; printf("%d\n",y); return 0; }